JConcepts New Release – 2002 Chevy S-10 Drag Truck

0413_1-e1586529960618.jpg

The 2002 S-10 mimicked the larger Chevy pickups during this time with the horizontal bar grille and nicely rounded contours. It looks like a truck, no tricks, no gimmicks, just sincere serviceability and drive. At JConcepts, we had a project in mind, combining the versatility of a mid-sized truck and an all-out drag racing machine for Street Eliminator fanatics and speed-run drivers.

0413_4-e1586530129918.jpg

The front-end of the truck designed itself with a lot of carry-over features from the Chevrolet brand which is embodied in the included decal sheet. The hood and cab have been lowered to provide minimal drag to the truck and lends itself to the trucks overall squatty appearance. The bed area has been flattened and raised to provide a lot of clearance and another low-drag feature built into the shell.

JConcepts has included a heavy hood-scoop touching off against the windshield and rounding into the front-end until tangency hits. The 13” wheelbase is positioned allowing flexibility on a variety of chassis builds including custom and Team Associated’s new DR10 vehicle. Fender flares are built into the rocker panel just as the scale S-10 and just open and flare enough to house drag racing tires such as the JConcepts Hotties.

Included in each body set, a 2002 Chevy S-10 decal sheet, rear wing option including lower support and upper wing spoiler and the paint mask for all windows. As always, each body set is backed with JConcepts customer support and racing heritage.

0413_2-e1586529979733-768x576.jpg
0413_1-e1586529960618-768x576.jpg
0413_3-e1586530147322-768x576.jpg

Notes from the team –
The rear wing consists of two pieces, the lower section is designed with an L-shape with support ribs which require double-sided tape (not included) to attach to the back of the tailgate. Once lower section is attached, apply more double-sided tape to the top of the support and drop on the upper wing into position. Photos show body mounted on Team Associated DR10.

Specifications –
The Chevy S-10 measures a 13.00″ wheelbase and the inside dimensions of the body are 11.75″ wide front and 12.00″ rear. The body is built for a 2wd SCT wheelbase length and narrowed to more resemble the original 1:1 counterpart. It’s helpful to plan your build, take measurements and modify your platform to fit inside the boundaries of the Chevy body.

0413Decals-e1586530284395.jpg

Features:
• Officially licensed by Chevrolet to JConcepts Inc.
• Body measures 11.75″ front, 12.00” rear width 13” wheelbase
• Two-piece rear wing for street elimination competition
• Fits an assortment of SCT length trucks with width modifications
• Blended, drag / scale inspired body, cab and window design
• 1:1 headlight and grill treatment
• Clear heavy-duty polycarbonate with protective film
• Window masks and detailed 2002 Chevrolet S-10 decal sheet

Chevrolet and nameplates are registered trademarks owned and licensed by Chevrolet. Manufactured by JConcepts, Inc

2002 Chevy S-10 drag truck, Street Eliminator body
Part# 0413
UPC Code – 845937022110
Retail price – $60.00
Map price – $51.00
(Fits – Custom SCT chassis, 11.75″ front, 12.00” rear width & 13″ wheelbase)
(Shown on and direct fit for Team Associated DR10)

Source: http://blog.jconcepts.net/2020/04/jconcepts-new-release-2002-chevy-s-10-drag-truck/?utm_source=rss&utm_medium=rss&utm_campaign=jconcepts-new-release-2002-chevy-s-10-drag-truck

Previous
Previous

Ryan Cavalieri talks about Building 1:10 Scale Shocks

Next
Next

BeachRC First Annual Virtual Easter Egg Hunt & Easter Weekend Sale!