New 721 SCUDERIA GEN2

image.png

Reds Racing is happy to announce that the new 721 SCUDERIA GEN2 engine is now available. Due to the success of 721 Scuderia GEN1 engine in recent competitions we have decided to maintain the main features unchanged and improve the carburetor with new materials to increase reliability. Furthermore, the new carb features a new double grab screw joint link to facilitate positioning and fitting with the servo link. To satisfy all our customers requests we have decided to release the new Scuderia Gen2 in 2 different color combinations (red or black) to match engines with any bodyshell.

Innovation

REDS is always striving to innovate. This means investment into new core technologies. Drawing from the rich experience gained through competing on the world’s best RC tracks with the best drivers in the world, our goal is to deliver quality products that are built with passion. The new S line does this.

 

Tech specs

The new 721 S Scuderia features high reliability, tuning stability and great fuel mileage. Combined with specific technical changes in the porting and new materials, this 7 port engine features higher power and better fuel efficiency compared to any REDS engine released from REDS.

 

High Torque

During testing we found the new engine is able to provide more torque compared to our competitors, making it suitable for both Buggy and Truggy.

 

Over 9 minutes run time

The 721 S Scuderia has proved to guarantee over 9 minutes runtime in recent competitions and tests thanks to new materials and coatings.

 

New Carburetor 

The GEN2 engine features a new carburetor with new materials to increase reliability and tuning stability, in particular the insulator bushing has been improved with a higher strength material. Furthermore, it features a new double grab screw joint link  to facilitate positioning and fitting with the servo link.

Screen Shot 2020-02-05 at 5.40.19 PM.png

 

Since its first release in 2019,  721 S line engines have proved to be simply successful. Here is a list of the main competitions:

 

Montpellier Gp > 1st Boots & 2nd Canas

Silver State > 1st Boots

Euro Contest > 2nd Canas

Buggy Land > 1st Canas

BRCA Nats Championship > 1st Boots & 2nd Clancy

Spanish Nats Championship > 1st Canas

Rc Gp Rd1 > 3rd Ogden

Rc Gp Rd 2 > 2nd Canas

Rc Gp Rd 5 > 2nd Boots & 3rd Canas

Rc Gp Rd 6 > 2nd Canas & 3rd Boots

Rc Gp Rd 7 > 2nd Ogden & 3rd Canas 

Rc Gp Rd 8 > 2nd Canas & 3rd Ogden


SPECIFICATIONS

Category: 1/8 Buggy and Truggy

Displacement [cm^3]: 3,5

Bore [mm]: 16,24

Stroke [mm] 16,8

Inlet ports: 7

Outlet ports: 1

Crankshaft: balanced with low friction DLC Coating

Backplate: aluminum with low friction DLC Coating

Front ball bearing: 7x19x6 rubber seal made in Japan

Rear ball bearing: 14x25,4x6 Swiss made ceramic

Carburetor diameter [mm]: 7.0 stock  (6.0, 6.5, 7.5 and 8.0 optional)

Carburetor: VCX2-A aluminum, 2 needles, GEN2

Weight [g]: 345

Fuel consumption: >9:00 min

Engine temperature: 110-130°C  (depending on air temperature)

Recommended Glow plug: REDS TS3

Recommended pipe: REDS 2143 + M Manifold or 2143 X-One pipe

Recommended fuel: 25-30% nitro, 8-10% oil

Break-in fuel: 12% oil

 Source: https://www.reds-racing.com/post/new-721-scuderia-gen2

Previous
Previous

Team Associated Welcomes Finland's Max Mort

Next
Next

HB Racing European Race Days